- +383 49 530 552
- [email protected]
- Ramadan Rexhepi, Ferizaj 70000
-
09:00 - 17:00 (Hëne - Premte)
09:00 - 17:00 (Hëne - Premte)
Analytical System |
Fully automated, random access chemistry system with STAT capability |
Analytical Principle |
Spectrophotometry and potentiometry |
Analytical Types |
Endpoint, rate, fixed point and indirect ISE |
Analytical Methods |
Colorimetry, turbidimetry, latex agglutination, homogeneous EIA, indirect ISE |
Simultaneously Processed Analytes |
60 photometric tests + 3 ISE, 120 pre-programmed onboard tests |
Throughput |
400 photometric tests/hour; maximum of 800 with ISE |
ISE Throughput |
200 samples/hr. Maximum tests/hr: 600 if ISE only |
Sample Types |
Serum, plasma, urine, other |
Sample Feeder |
Racks with 10 samples each (barcodes on primary tubes and on racks); capacity of 80 samples; continuous loading |
Sample Tubes |
Primary and secondary tubes; diameter from 11.5 to 16 mm; height from 55 to 102 mm, nestled micro sample cups |
STAT samples |
Up to 22 positions for STAT samples via cooled turntable. Easy-to-operate interrupts between tests. Auto-repeat run capability. |
Sample Volume |
1–25 μl in 0.1 μl steps (1-25 μl for repeats) |
Reagent Capacity |
76 positions for (R1+R2, detergent position). Holds 15, 30 and 60ml bottles. |
Reagent Storage |
Refrigerated (4–12°C) |
Reagent Volume |
R1: 10–250 μl; R2: 10–250 μl (in 1 μl increment) |
Total Reaction Volume |
90–350 μl |
Reaction Cuvette |
Permanent glass cuvettes |
Reaction Time |
Up to 8 minutes, 37.5 seconds |
Reaction Incubation |
37°C, dry bath |
Photometry System |
Direct assay through the reaction cuvette (0–3.0 OD) mono and bichromatic measurements possible |
Wavelength |
13 different wavelengths between 340–800 nm |
Calibration |
Auto calibration, cooled calibrator positions; master calibration established by two-dimensional barcode |
Quality Control |
Auto QC, cooled QC positions |
Rerun |
1. Auto rerun and manual rerun available 2. Automatic sample increase, decrease or normal repeat 3. Reflex testing |
Sample Pre-dilution |
Dilution ratio: Fixed to 3, 5, 10, 15, 20, 25, 50, 76 or 100 |
Test Requisition |
Individual and profile test requisition via online, mouse, function keys and touch-screen |
Sample Integrity |
Lipaemia, Haemolysis and Icterus analysis. Sample clot detection and probe crash protection. |
Online |
RS232C. Full uni- and bidirectional communication possible. |
Software |
Windows 7® |
Data Storage |
Sample number 100,000 samples. Reaction Data 200,000 tests. |
Dimensions (W x H x D) |
ANL: 1450 mm x 1205 mm x 770 mm |
Power Supply |
100–240v; 60 Hz/ < 3.5 kVA |